24/7 Emergency Service Open 7 days · 7am–8pm Serving Reno, NV & nearby
(775) 278-5997
Reno, NV

Ask for Your Reno Garage Door Quote

Get an accurate garage door quote in Reno. We explain what info speeds up pricing and what needs an in-person look before we can quote it.

  • Free estimates on new-door installs
  • Diagnosis first - you hear what’s wrong before any work
  • Repairs and installs for residential & commercial doors
  • Local service across Reno, NV and nearby

Prefer to talk? (775) 278-5997

How to Reach Us

Call us at (775) 278-5997 or stop by 4795 Longley Ln, Reno, NV 89502. That's our home base, and it puts us within a few miles of most of the neighborhoods we work in - Northwest Reno and Northeast Reno are both about 3 miles out, West University is a mile southeast, and Sun Valley and Verdi are a short drive at 6 and 7 miles.

When you call, have your address ready along with the door's approximate age and whether it's a single or double door. If you know the brand or can read a model number off the track or spring, tell us - it saves a step. A phone quote gets you a range. A firm number usually needs someone standing in front of the door.

We also cover Cold Springs, Spanish Springs, and North Valleys, along with Virginia City about 20 miles out. If your address falls outside that radius, ask when you call rather than assume - we'd rather tell you straight than waste your afternoon.

  1. 1

    Call and tell us what it’s doing

    (775) 278-5997 - describe the symptom and roughly where you are.

  2. 2

    Or send it in writing

    Use the quote request form if it’s easier than talking - same information, same day’s queue.

  3. 3

    We diagnose on site

    A technician tests the door under power and by hand before anything is quoted or replaced.

  4. 4

    You approve the plan

    You hear what failed and what it takes to fix it - the work starts only after that.

What We Are Called Out For

A lot of the housing stock across our service area went up between 1938 and 2003, with the bulk of it dating to the 1980s and '90s across five named areas nearby. That means a good share of the doors we quote are original springs, tracks, and openers from that build era - parts that have simply worn out from age rather than any one dramatic failure.

Winters here get genuinely cold, and cold makes steel brittle and grease stiff. Torsion springs that have cycled for twenty or thirty years tend to snap on the first hard freeze of the season, and openers with old gears start slipping when the grease thickens. Rollers seize, cables fray at the drum, and weatherstripping cracks and lets the cold in under the door.

We also get calls for doors that were never wrong to begin with - just off-balance from a spring that's lost tension slowly, which throws extra load on the opener and shortens its life. If your door has gotten noisy or heavy to lift by hand, that's usually the first sign, well before anything breaks outright.

Reno garage door

Plain Answers

A quote is accurate when we know the door's size, panel material, and the type of spring system - torsion or extension - plus how it's currently failing. Tell us if the door won't open, won't close, is off its track, or is just noisy, and we can usually narrow the price before we arrive.

What we can't price over the phone: hidden damage behind a bent panel, a track that's been pulled out of alignment from a vehicle impact, or an opener where the motor sounds fine but the logic board is failing intermittently. Those need eyes on the actual part. We won't guess a number just to get a job on the books, because a wrong guess either underbids the work or scares off a homeowner who'd have been fine with the real price.

One limitation worth saying plainly: on doors built in the 1980s or earlier, some hardware is no longer manufactured, and matching a single panel or roller size isn't always possible. In those cases we'll tell you honestly whether a full replacement makes more sense than chasing an obsolete part, rather than stringing out a repair that won't hold.

Who Does the Work

We're one company working out of Reno, on Longley Ln, and we work on doors - springs, openers, tracks, panels, cables, rollers. No sales team upselling add-ons, no subcontracted crews from out of the area. Whoever quotes the job is familiar with the housing stock here, which matters more than it sounds: a door installed on 1989-era hardware doesn't take the same parts as one from a 2003 build, even in the same neighborhood.

Given the median household income in our service area sits around $102,625, and with close to 12,000 owner-occupied houses among roughly 18,000 households nearby, most of what we see are single-family homes with owners who plan to stay put - not flip properties. That shapes how we quote: we'd rather size a repair to last through the next cold snap than sell a stopgap.

We don't do commercial rolling doors or fire-rated assemblies. If that's what you need, say so up front and we'll tell you plainly instead of taking the call and figuring it out on-site.

Reno, NV
Licensed & insured
Free estimates
Residential & commercial
How we work

What to expect

Diagnosis firstEvery visit starts by finding what actually failed - not a pre-written parts list.
The right part for the doorSprings and openers matched to the door’s weight and age, so the fix holds up.
Straight answersWhen a repair makes more sense than a replacement - or the reverse - you hear it plainly.
Clean, careful workTension released safely, hardware set true, the door tested under power before we leave.
Questions

Frequently asked

Straight answers about garage door repair in Reno. Still unsure? Ask us directly.

Why do garage door springs break more in winter?

Cold makes steel more brittle, and Reno sits in a cold-severe climate band. A torsion spring that's already near the end of its cycle life is far more likely to snap on a freezing morning than a mild one. We see a clear jump in spring calls during the coldest stretch of the year, most of them on doors from the 1980s and 90s running original hardware.

Is my garage door old enough to worry about parts?

If your house was built in the median era for the area, around 1989, your door hardware is likely thirty-plus years old. Common parts like springs and rollers are usually easy to source. Where it gets harder is opener boards from discontinued models - those can take longer to find, and sometimes a new opener costs less than chasing the old part.

Do you work outside Reno itself?

Yes. We cover Sun Valley, Verdi, Cold Springs, Spanish Springs, Virginia City, West University, Northwest Reno, Northeast Reno, and North Valleys. If your address falls outside that footprint we'll tell you directly on the phone instead of booking a job we can't reach promptly.

Should I repair or replace my opener?

Depends on the age and the failure. If the motor runs fine but a part like the circuit board is discontinued, sourcing that part often costs more than a new opener unit. If it's a simple fix like a sensor or a remote issue, repair almost always makes more sense. We'll tell you which situation you're in before recommending either.

Ready to get your garage door sorted?

Tell us what it’s doing and where you are in Reno - we’ll take it from there.

Request a QuoteCall